Accusync Medical Research Corporation | AccuSync® 42
16554
page-template,page-template-full_width,page-template-full_width-php,page,page-id-16554,ajax_fade,page_not_loaded,,hide_top_bar_on_mobile_header,qode-theme-ver-14.3,qode-theme-bridge,wpb-js-composer js-comp-ver-5.4.7,vc_responsive
 

AccuSync® 42

AccuSync® 42  R Wave Trigger

Features

  • Automatic R-Wave Detection
  • Adjustable ECG Output
  • Patient Isolation
  • Universal Voltage

  • 3 Selectable ECG Leads
  • Trigger Pulse LED
  • External ECG Interface
  • RS-232 Serial Interface

Designed for use in conjunction with imaging systems in gated cardiac studies, the AccuSync 42 ECG triggering device automatically detects the R Wave with precision and reliability.

Specifications

ECG Isolation Amplifier

  • PATIENT LEAKAGE CURRENT

    less than 10 μAwith 230 V~, 60 Hz applied to the patient leads. Patient related circuitry is isolated from ground by more than 4000 V, 5500 V peak.

  • DEFIBRILLATOR PROTECTION

    5000 V, 10 ms duration.

  • COMMON MODE REJECTION RATIO

    90db with 51 kOhm imbalance.

  • INPUT IMPEDANCE

    100MOhm

  • BANDWIDTH

    Diagnostic: 0.05 to 100Hz

    DigitalOutput: 0.5 to 100Hz

  • PATIENT CABLE

    3 lead system, RA, LA and LL with 6 pin connector.

  • INPUT BIAS CURRENT

    50 nADC

  • ELECTRODEOFFSET POTENTIAL

    +/- 0.5V

  • SENSITIVITY

    100 μV peak

OUTPUTS

The R trigger is a 5V TTL/CMOS (or 12V) compatible square wave for the computer trigger; independent of ECG signal polarity. The output can deliver 35 mA of current or drive up to 150 feet long RGU 174/U cable. R trigger is compatible with all computers including Angiodynamics, Digirad, GE, Hitachi, Toshiba, Siemens. Designed for SPECT, PET, CT, Ultrasound, and multiple modality imaging systems.

RS232 interface available to transmit and receive information via an IBM or compatible computer. In transmit mode, the interface will send the ECG data to the computer while in receiver mode the computer will control the parameters of the instrument.

ECG Output: Variable gain analog ECG signal up to x2000.

DIMENSIONS: 3.058″Hx7.188″W x6.375″D

CONSTRUCTION: Aluminum

POWER: 100-240 V~ (universal auto-switching), 60/50 Hz, 6 W